DLM6000 MSO & DSO SERIES

Yokogawa's new DLM6000 series digital and mixed signal oscilloscopes boast fresh physical and on-screen interfaces, based on extensive market research and user feedback. It incorporates dedicated, backlit buttons for the most commonly accessed settings, and unique Yokogawa controls, like the 5-way selector button and spring loaded ‘jog shuttle' control.

The DLM6000 series oscilloscopes offer an extensive range of capabilities for waveform characterization, powerful tools for detecting glitches and anomalies, advanced signal enhancement and noise reduction technologies, and a range of options for serial bus analysis and power measurement. Select from models with four channels plus 16 or 32 bit logic inputs, and 500MHz, 1.0GHz, or 1.5GHz bandwidths.

  TY700 Series Digital Multimeters

4.5-digit (50,000-count dual display, 51-segment bar graph display), RMS type Measurement Functions: Voltage, Current, Resistance,Continuity Check, Diode Test, Frequency, Capacitance,Temperature, Low Power Resistance (TY720 only) Features: Category 600V, Category 1000V, Large Internal Memory (TY720:10,000 data; TY710:1,000 data), USB Communication function, Closed Case Calibration (User calibration function),

 Data Logger / Portable Data Station (Datum-Y)

World first in measuring instruments! We are the first to obtain IPv6 Ready Logo Phase-1(ID:01-000273). Portable size (155×155×55mm) and lightweight (approx. 800g) , lets you carry with one hand. Use of a color TFT LCD with wide viewing angle.

• Improves resistance to impact by use of rubber boots (standard accessory).
• Auto set & Auto run function by inserting external memory.
• Alarm, Statistical operation and external function

The WT210/WT230 has five times the high-frequency range and approximately twice the basic accuracy as the previous generations plus a high-speed data acquisition rate and a compact design make this digital power meter highly desirable.

The Yokogawa WT210 is listed and endorsed as an accepted device by SPEC for performing these accurate power measurements. With a bandwidth of DC and 0.5Hz to 100KHz, the WT210 offers a base accuracy down to 0.1%. The meter can be controlled by an external controller using either RS232 Serial or GPIB communication interfaces and can provide update rates as fast as 10/sec (100msec).